ZyXEL Communications Dimension GS-3012F, Руководство пользователя

Страница: 175 / 235

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-3
Figure 28-2 CLI: Login Screen
28.4 Command Syntax Conventions
The rules of the commands are listed next.
The command keywords are in
courier new
font.
The required fields in a command are enclosed in angle brackets
<>
, for instance,
ping <ip>
means that
you must specify an IP number for this command.
The optional fields in a command are enclosed in square brackets
[]
, for instance,
configure snmp-server [contact <system contact>] [location <system location>]
means that the
contact
and
location
fields are optional.
“Command” refers to a command used in the command line interface (CI command).
The
|
symbol means “or”.
The entry
<cr>
in the command lines refers to carriage return. Press [ENTER] or carriage return after a
command to execute the command.
Use the up (
y
) or down (
z
) arrow key to scroll through the command history list.
The CLI does not accept partial or incomplete commands. You may enter a unique part of a command and
press [TAB] to have the switch automatically display the full command. For example, if you enter
“
config
” and press [TAB], the full command of “
configuration
” automatically displays.
Each interface refers to a switch Ethernet port. Commands configured after the interface command
correspond to those ports.
Type multiple ports or port ranges separated by a comma. Ranges of port numbers are typed separated by a
dash.
28.5 Getting Help
The system includes a help facility to provide you with the following information about the commands:
List of available commands under a command group.
Detailed descriptions of the commands.
28.5.1 List of Available Commands
Enter “
help
” to display a list of available commands and the corresponding sub commands.
Enter “
?
” to display a list of commands you can use.
Enter User Name : admin
Enter Password : XXXX