B-6010/B-6020 Secure Outdoor Ethernet Radio Link
7
Figure 4-3 Mounting Bracket Assembly
4.
Attach mounting bracket and the grounding wire to the back of the outdoor unit as shown in Figure 4-4
.
Figure 4-4 Attach Mounting Bracket to Outdoor Unit
5.
Fasten the mounting bracket assembly to Install outdoor unit on the mast. The height of top of the mast can’t
exceed the top of outdoor unit to reduce interference to the antenna.
Figure 4-5 Install Outdoor Unit to the Mast
6.
Install the antenna to the N-male connector port labeled
on the top of outdoor unit. For the omni-directional
antenna, you can attach the antenna to the N-male connector directly or use the attached HDF 400 RF coaxial
cable to connect the antenna and antenna connector on the top panel of outdoor unit. For the directional antenna
installation, use the HDF 400 RF coaxial cable. The polarization of directional antenna for both AP and AC
