B-6010/B-6020 Secure Outdoor Ethernet Radio Link
5
z
9600 Baud
z
No parity, 8 Data bits, 1 Stop bit
z
Flow Control set to None
After the B-6010/B-6020 is properly set up, you can make future changes to the configuration through telnet
connections.
3.2. AC
Configuration
The AP supports AC’s MAC access control. Prior to complete communication between AP and AC, you have to set
AC’s MAC address for B-6010/B-6020 AP.
1. In AP’s SMT Main Menu, select
6. Network Setup
.
2. In AP’s
Menu 6 Router Mode Network Setup
, set
AC1 Operation mode=
Enabled,
MAC
Address=
00:02:CF:13:46:79 (the AC’s MAC Address).
Figure 3-1 Menu 6 – Network Setup of AP
NOTE: The MAC address of AC can be found on a bar code sticker at the left side of B-6010/B-6020.
4. Hardware Installation
4.1. B-6010/B-6020 Physical Connection
The physical cable connection of the B-6010/B-6020 is shown on the following pictures.
Menu 6 - Router Mode Network Setup
AP AC1 AC2
Operation mode: Enabled Disabled
Device ID: 1 2 N/A
Pre_Share Key: 123456789 N/A
Ethernet (LAN) Setting:
LAN IP: 192.168.80.217 192.168.2.1 N/A
Network Mask: 255.255.255.0 255.255.255.0 N/A
RIP Direction: Both Both N/A
RIP Version: RIP-2B RIP-2B N/A
DHCP Edit: Yes N/A
Wireless (WLAN) Setting:
MAC Address: 00:02:CF:13:46:79 N/A
VPN Security: None N/A
AC1&AC2 VPN Security: None
Press ENTER to Confirm or ESC to Cancel:
