B-6010/B-6020 Secure Outdoor Ethernet Radio Link
9
Figure 4-8 Cable Connections of Network/Power Injector
4.4. Initializing
the
B-6010/B-6020
1.
When plugging the switching power adapter into the 110V/220V wall outlet, the LED named
PWR
on the
network/power injector will light on.
2.
When the power and signal connection to outdoor unit are complete, the
ACT
LED of the network/power
injector will light on.
4.5. Antenna
Alignment
You had better align the directional antenna each other to maximize the signal quality for B-6010/B-6020 system.
To do the antenna alignment, you can choose
optional
AK-100 which will show you the signal strength and link
quality on its panel or the laptop PC which show the signal strength and link quality on its SMT 24.1 to refer to the
alignment. To do the alignment, follow the steps as below:
Notice: The antenna alignment is only applicable for the access client (AC)
1.
Open the cover of the console port labeled
on the bottom of the
access client (AC)
and well reserve the
cover.
2.
Connect the RS-232 cable to this console port.
3.
Connect the other end of the RS-232 cable to the antenna alignment kit AK-100 or the laptop.
Note: The PWR led will be ON and the ACT led will flash periodically when connect the AK-100 to the
B-6010/B-6020.
4.
Adjust the horizontal angle of directional antenna first to get the maximum reading in the
LEVEL
and
SNR
display of AK-100, or the
STRENGTH
and
QUALITY
in the SMT 24.1., both show the percentage of signal
strength and link quality of the radio link.
5.
Adjust the vertical angle of directional antenna to get the maximum reading in the
LEVEL
and
SNR
display or
the
STRENGTH
and
QUALITY.
6.
Repeat step 4 and step 5 until achieving the best reading index, then remove the antenna alignment kit or laptop
and the RS-232 cable from B-6010/B-6020.
Note: The AK-100 will beep more rapidly when getting better link quality and continuous beep after
performing the best link quality during the antenna alignment procedure.
7.
Put the console port cover back to the console port.
1.
2.
3.
