Zycoo CooFone-D30, Руководство пользователя

Страница: 50 / 79

Copyright ©ZYCOO All rights reserved. V1.0
46
2
、
Press the hold key to hold the current multicast session
3
、
Press the end key again or multicast function key, multicast session can be stopped
Notice: RTP stream is one side that is from a sender to a receiver. When the phone initiates a multicast RTP session
in a call, the current call is on hold.
Receive multicast setting
You can set up the phone monitoring 10 different multicast addresses to receive these multicast RTP stream.
You have two methods to receive RTP stream of multicast that can be set up through the web page:
Enable priorities of normal calls and Enable page Priority:
Enable priorities of normal call by select it, if the incoming RTP stream priority of multicast lower than the priority
of current for normal calls, the phone will ignore the RTP stream of multicast. If the incoming RTP stream priority
of multicast higher than the priority of current for normal calls, the phone will receive the RTP stream of multicast,
and hold the current call.
Disabled priorities of normal call by select disable, the phone will ignore all local networks RTP stream of multicast.
Options as follows:
1-10: the priority defined for normal calls, 1 the highest level, 10 the lowest level
Disabled: Ignore all RTP stream of multicast
Enable Page Priority
Page priority determines the phone how to handle the newly received multicast RTP stream when in a multicast
session. Enabled page priority, the phone will automatically ignore the low priority multicast RTP stream and receive
the high priority multicast RTP stream and hold the current multicast session; If not enabled, the phone will
automatically ignore all incoming multicast RTP stream.
Web page is set as follows:
Now multicast “ss” has higher priority than multicast “ee”, the highest priority is for normal calls
Notice: When a multicast session begins, multicast sender and receiver will beep
7.3.5 PHONE
7.3.5.1 AUDIO
On this page, you can configure voice codec, input/output volume and so on.