Zycoo CooFone-D30 Скачать руководство пользователя страница 41

Страница: 41 / 79

Session Timeout

Set the session timeout.

Subscribe for MWI

Enable the Subscribe for MWI by selecting it, the phone will send subscribe

message for MWI to the SIP Server.

MWI Number

Specify the MWI Number; Please contact your system administrator for the

connecting code. Different systems have different codes.

Subscribe Period(s)

Overtime of resending subscribe packet. Suggest using the default configuration.

Conference Type

Specify the Conference Type, if you select the local, you needn’t input the

conference number.

Conference Number

Specify the network conference number, please contact your system

administrator for the network conference number.

Registration Expire(s)

Set expire time of SIP server register, default is 60 seconds. If the register time of

the server requested is longer or shorter than the expired time set, the phone will

change automatically the time into the time recommended by the server, and

Enable Service Code

If you want to realize the following function by the server, please enter the On

Code and Off Code option, then when you choose to enable/disable following

function on your IP phone, it will send message to the server, and the server will

turn on/off the function immediately.

DND On Code

Set the DND On Code, When you press the DND hot key, the phone will send a

message to the server, and the server will turn on the DND function. Then any

calls to the extension will be rejected by the server automatically. And the

incoming call record will not be displayed in the Call History.

DND Off Code

Set the DND Off Code, When you press the DND hot key, the phone will send a

message to the server, and the server will turn off the DND function.

Always CFwd On Code

Set the Always CFwd On Code, when you choose to enable the always forward

function on your phone, it will send message to the server, and the server will turn

on the function immediately. When there are calls to the extension, the server will

always forward it to the set number automatically. And the IP phone will not show

the record in the call history anymore.

Always CFwd Off Code

Set the Always CFwd Off Code, when you choose to disable the always forward

function on your phone, it will send message to the server, and the server will turn

off the function immediately.

Busy CFwd On Code

Set the Busy CFwd On Code, when you choose to enable the busy forward

function v on your phone, it will send message to the server, and the server will

turn on the function immediately. When there are calls to the extension, the

server will forward it to the set number automatically based the forward type. And

the IP phone will not show the record in the call history anymore.

Busy CFwd Off Code

Set the Busy CFwd Off Code, when you choose to disable the busy forward

function on your phone, it will send message to the server, and the server will turn

off the function immediately.

No Answer CFwd On Code

Set the No Answer CFwd On Code, when you choose to enable the on answer

forward function on your phone, it will send message to the server, and the server

Содержание CooFone-D30














































































Результаты поиска

Содержание CooFone-D30

Отзывы:

Похожие инструкции для CooFone-D30

Бренды по названию

Популярные бренды

Zycoo CooFone-D30, Руководство пользователя

Результаты поиска

Содержание CooFone-D30

Отзывы:

Похожие инструкции для CooFone-D30

Бренды по названию

Популярные бренды