Zycoo CooFone-D30 Скачать руководство пользователя страница 14

Страница: 14 / 79

If User is not on another phone, lift the handset to use, or press the

Speaker

button/

Answer

softkey to answer

using the speaker phone, or press the headset button to answer the headset.
2.

If user is on another call, press the

answer

softkey.

During the conversation, you can alternate between Handset and Speaker phone by pressing the corresponding

buttons or picking up the handset.

3.2

DND

Press DND soft key to active DND Mode. Further incoming calls will be rejected and the display shows:

icon.

Press DND softkey twice to deactivate DND mode. You can find the incoming call record in the Call History.

3.3

Call Forward

This feature allows user to forward an incoming call to another phone number. The display shows

icon. The

following call forwarding events can be configured:

Off

Call forwarding is deactivated by default.

Always

Incoming calls are immediately forwarded.

Busy:

Incoming calls are immediately forwarded when the phone is busy.

No Answer:

Incoming calls are forwarded when the phone is not answered after a specific period.

To configure Call Forward via Phone interface:

Press

Menu ->Features->Enter->Call Forwarding->Enter

There are 4 options: Disabled, Always, Busy, and No Answer.

If user choose one of them (except Disabled), enter the phone number you wants to forward to receiving party.

Press

Save

to save the changes.

3.4

Call Hold

Press the Hold button or Hold softkey to put your active call on hold.

1. If there is only one call on hold, press the hold softkey to retrieve the call.

2. If there are more than one call on hold, press the line button, and the Up/Down button to highlight the call, then

press the Unhold button to retrieve the call.

3.5

Call Waiting

Press

Menu ->Features ->Enter ->Call Waiting ->Enter

Use the navigation keys to activate or deactivate call waiting.

Then press

Save

to save the changes.

Содержание CooFone-D30














































































Результаты поиска

Содержание CooFone-D30

Отзывы:

Похожие инструкции для CooFone-D30

Бренды по названию

Популярные бренды

Zycoo CooFone-D30, Руководство пользователя

Результаты поиска

Содержание CooFone-D30

Отзывы:

Похожие инструкции для CooFone-D30

Бренды по названию

Популярные бренды