FV563 Rev. - 12/2/14
Page 3
1.2)
Place the sensor connector wire and shank through cover
plate gasket and hole in the lavatory. Orient black plastic mount-
ing washer with the slot facing up. Place mounting washer and
star washer over shank and secure the entire assembly to the
lavatory with the mounting nut.
1
2
Spout Gasket
Plate Gasket
Plastic Mounting
Washer
Star Washer
Mounting Nut
1.3)
Ensure that plastic washer is facing forward.
The sensor
cable must pass through slot in plastic mounting washer. *Do
not pinch sensor cable.
1.1a) Pass sensor connector cable and shank through gasket.
Align gasket with faucet bottom and press firmly together.
(For faucets with -CP4 or -CP8 suffix)
1.1b) Pass sensor connector and shank through cover plate and
fasten to the faucet with the provided screws.
Step 1. - Spout Installation
3
4
Shank Gasket
Black Box
Hex Nut
5
Shank Gasket
Black Box
Assembly
Hex Nut
-IM BATTERY
BOX
2.3) Ensure that arrows are aligned for all connections.
6
Step 2.- Electronics Module Installation
2.1)
Attach electronics module to the shank using the hex nut
and gasket provided. Orient the electronics in a convenient loca-
tion and tighten hex nut.
DO NOT USE THREAD SEALANT.
2.2)
Attach sensor connector cable from the faucet to the mat-
ing sensor connector cable from the eletronics module. Orient
connectors so that the pins are properly aligned before pressing
connectors together.
Do not force together, damage to pins may
occur.
Be certain that the cable connection is made before the
batteries are installed.
