Page | 9
Step 10 - Apply Wi-Fi Network Security Settings
By default, the ZuniDigital Travel Connect broadcasts as an OPEN network with no data encryption. If you wish
to enable network encryption to help secure your network, please select the encryption type you want to use,
establish a password that you can remember, and then click the “
Finished
” button. This will finalize the settings
for your Travel Router and you may begin using it as a wireless access point.
Step 11 - Using the Travel Router
Attach the Ethernet cable that provides the Internet connection into the WAN (Internet) port, then power the
travel router ON and wait for it to fully boot. The router will broadcast the SSID setup in step 9 which you can
connect wireless devices to.
RESTORE FACTORY DEFAULT SETTINGS
Should you at any time with to restore the factory default settings press and hold the “Reset” button on the
bottom of the Travel Router for 10 seconds, then release. The travel router will re-boot and all of the original
factory settings will be restored.
