Page | 5
Setup Instructions
WIRELESS SETUP (ROUTER MODE)
ABOUT ROUTER MODE
For this mode the ZuniDigital Travel Connect uses a wired Broadband connection as the WAN (Internet)
connection, to create a new sub-network that can then be shared via Wi-Fi and the LAN port on the travel
router.
Follow these instructions to setup the ZuniDigital Travel Connect for use in ROUTER Mode
.
For the best results
do not place the ZuniDigital Travel Connect near any large metal objects or magnets (like those found in
speakers). Also note that elevating the travel router from the floor will increase wireless broadcast signal
performance and range.
THE SWITCH ON THE TRAVEL ROUTER IS SET TO ROUTER
Step 1 - Attach LAN (Ethernet) Cable
Attach one side of an RJ-45 Ethernet cable into the LAN (Ethernet) port of the Travel Router, and then connect
the other end to the Ethernet port on your computer.
