Page | 14
Step 10 – Configure WAN (Internet) Parameters
This step lets you configure the router to utilize the broadband signal provided by the Internet provider. The
majority of providers use DHCP which is the default setting of the ZuniDigital Travel Connect. This setting should
work in most locations, but if you have any questions on which setting to use, please contact the Internet
Service Provider or the local network administrator.
Step 11 - Configure Basic Wi-Fi Settings
Use this page to personalize the name of the wireless network (SSID) to be broadcast by the ZuniDigital Travel
Connect. If desired, changes can be made to these settings, but it is recommended that only experienced users
do so. Otherwise it is recommended that you do not make any changes to default values that are listed.
