Zultys ZIP2, Руководство пользователя

Страница: 82 / 98

74
ZIP2 User’s Manual
B.4.5 VLAN Configuration
VLAN parameters can configure the ZIP2 to match the settings in your network. Figure B-10 lists
the VLAN configuration parameters.
B.4.5.1 Programming Restrictions
You can configure the ZIP2 with up to three independent VLAN settings for SIP signalling
packets, RTP packets, and all packets.
Setting ANY of these parameters will enable VLANs for the phone and insert an IEEE 802.1q
header into all Ethernet frames. The result is the phone will not be able to communicate with any
remote device that does not belong to the same VLAN specified in the IEEE 802.1q frame,
especially if it’s an arbitrary number (like 0).
Do not set any of these parameters unless you have explicit values to assign.
B.4.5.2 Sample Configuration File
Figure B-11 displays the VLAN settings section from a sample configuration file.
Parameter Description
Equivalent
web interface
parameter
Version
Introduced
IF0PRIORITYTAG Defines the priority tag for all outgoing packets.
Valid settings range from 0 to 7.
Default value is an empty string
section A.2.4 on
page 50
3.35
IF0VLANTAG Defines the VLAN tag for all outgoing packets.
Valid settings range from 0 to 7.
Default value is an empty string.
section A.2.4 on
page 50
3.35
PRIORITYTAG_CALL Defines the priority tag for all outgoing SIP
signaling packets (overrides the
IF0PRIORITYTAG for signaling packets only).
Valid settings range from 0 to 7.
Default value is an empty string.
section A.2.9 on
page 55
3.35
PRIORITYTAG_RTP Defines the priority tag for all outgoing RTP
packets (overrides the IF0PRIORITYTAG for
RTP packets only). Valid settings range from 0 to
7.
Default value is an empty string.
section A.2.9 on
page 55
3.35
VLANTAG_CALL Defines the VLAN tag for all outgoing SIP
signaling packets (overrides the IF0VLANTAG
setting for signaling packets only). Valid settings
range from 0 to 4094.
Default value is an empty string.
section A.2.9 on
page 55
3.35
VLANTAG_RTP Defines the VLAN tag for all outgoing RTP
packets (overrides the IF0VLANTAG setting for
RTP packets only). Valid settings range from 0 to
4094.
Default value is an empty string.
section A.2.9 on
page 55
3.35
Figure B-10 VLAN Configuration Parameters