ZUG BCSG, Руководство по эксплуатации

Страница: 28 / 40

10 Trouble-shooting
▸ Remove the left shelf guide.
▸ Place the screw driver along the middle of the
edge of the glass and carefully remove the glass
light cover
1 from its fixture.
▸ Take out the defective halogen light bulb.
▸ Carefully fit the new halogen light bulb.
1
Do not touch the halogen light bulb with bare hands. Instead, use a fine, dry,
grease-free cloth.
▸ Press the glass light cover 1 back into its fixture.
▸ Repeat the same process to replace the second halogen light.
▸ Replace the shelf guides.
▸ Switch the power supply back on.
10 Trouble-shooting
10.1 Procedure
This section lists faults that can be solved simply by following the instructions given. If
another fault is displayed or the fault cannot be remedied, please call Customer Ser-
vices.
Before calling Customer Services:
▸ Please note down the serial number (FN) (see 'Technical data' for the identification
plate) and the error message in full, e.g.
xx
.
10.2 What to do if …
… the appliance is not working
Possible cause Solution
▪ A household fuse or circuit
breaker has tripped. ▸ Set all the dials to «0».
▸ Change the fuse.
▸ Reset the circuit breaker.
▪ The fuse or circuit breaker
keeps blowing. ▸ Call Customer Services.
▪ An interruption in the mains
power supply. ▸ Check the mains power supply.
… just the illumination is not working
Possible cause Solution
▪ The halogen light is defective. ▸ Switch off the oven and set all the dials to «0».
▸ Disconnect the appliance from the electricity sup-
ply.
▸ Replace the halogen light bulb.
28