Zubler VARIO S 400, Руководство по эксплуатации

Страница: 9 / 24

9
Seite Seite Seite Seite Seite Seite
1148 C 04:57:04
0
500
0
1000
1500
1650
1/4 1/2 3/4 1
1148 C 04:57:04
Abort
Program
000-Test
1148C Start 008-Sinter-Test
À
23
Graph
Page
1 Operation
1.1 Run Programs
Run Program
■
A program can be started between 250 °C and
400 °C. If muffle temperature is over 250 °C, the
oven automatically opens and waits until it rea-
ches 250 °C. After it reaches 250 °C it will conti-
nue with the program.
■
The most recently run program will always be
highlighted after “Run Program” is selected
from the “Main Menu”. If you wish to select
another program, use the +/- buttons or dial to
select another program or press the red “Esc”
button to go to the “Brand” menu, where you
may select another brand that contains the desi-
red program to run.
■ Once a program has been selected, Press the
green "Enter" button to preview the selected
program.
■
If Preview Mode is activated - The furnace will
show a preview of the program and ask if you
want to run this program. Press the green “Yes”
button to confirm and run the selected program.
Press the red “No” button to return to the pre-
vious menu.
■ The default view is “Program” mode. This
mode displays the program parameters and
highlights each parameter as it is running.
■ To view the running program in graph mode,
press the yellow “Graph” button.
■ To abort the program, press the red “Abort” but-
ton.
■
To activate/deactivate the Preview Mode
(see 1.4.5).
* While the program is running, you can switch between parameter view and
graph view by pressing the yellow button.
000-Test
1148C Start 008-Sinter-Test
À
23
-Rate 1 (°/min) 15C
-Temp 1 1000C
-Hold 1 (min) 60:00
-Rate 2 (°/min) 10C
-Temp 2 1300C
-Hold 2 (min) 60:00
-Rate 3 (°/min) 5C
-Temp 3 1650C
-Hold 3 (min) 120:00
-Rate 4 (°/min) 20C
-Temp 4 600C
-Cool Rate (°/min) 20C
-Open temp 250C
Abort
Page