Zubler VARIO S 400, Руководство по эксплуатации

Страница: 10 / 24

10
Seite Seite Seite Seite
<
250C 04:12:25
Page
1 Operation
Page
Enter
Graph
1-DCS ULM
450C Edit “ 27-SPEED “
1-DCS ULM
450C Edit “ 27-SPEED “
Begin in 2:36
-Start Program
13:18 10.Aug.15
End at
14:54 10.Aug.15
-Rate 1 (°/min) 50C
-Temp 1 1100C
-Hold 1 (min) 0
-Rate 2 (°/min) 20C
-Temp 2 1500C
-Hold 2 (min) 30
-Cool Rate (°/min) 30C
-Open temp 300C
Begin in
2:35:50
Esc
Abort
1.2 Start with timer
The most recently run program will always be high-
lighted after “Start with timer” is selected from the
“Main Menu”. If you wish to select another program,
use the +/- buttons or dial to select another program
or press the red “Esc” button to go to the “Brand”
menu, where you may select another brand that
contains the desired program to run.
Once a program has been selected, Press the green
"Enter" button to preview the selected program.
If Preview Mode is activated - The furnace will show
a preview of the program and ask if you want to run
this program. Press the green “Yes” button to confirm
and run the selected program. Press the red “No”
button to return to the previous menu.
Enter the desired delay time (in hours and minutes).
Once selected, the end time of the sintering process
will be displayed.
Press the green “Enter” button to continue. The
program will now start and finish at the desired time.