Zubler VARIO PRESS 300, Руководство по эксплуатации

Страница: 9 / 49

9
Page
■
Leave at least 8” – 12” of free space
around and above the unit. Adjacent
structures surrounding the unit should
be non-flammable and the area
should be well-ventilated.
■ Follow fire department guidelines,
always store a multi-purpose dry
chemical fire extinguisher in your
laboratory in proximity to the furnace
and ensure that your employees have
been properly trained in its use.
■
Never wear loose fitting or hanging
garments while using this furnace. Be
careful when reaching for items sto-
red around the furnace. Flammable
material could be ignited if brought
into contact with any of the unit’s hot
surfaces and may cause severe burns.
■
Any potentially flammable materials,
such as (but not limited to) paper,
brushes, alcohol, sprays and solvents,
should not be used or even stored
next to the furnace and no materials
should ever be placed on top of the unit.
■
Do not set the furnace or vacuum
pump next to uninsulated heat sources.
(e.g. Other furnaces or ovens)
■ Soldering in this furnace will considerably
reduce the life of the thermocouple
and muffle and will void the warranty.
■
Use this furnace only for its intended
purpose as described in this Owner’s
Manual and carefully remove all
packing materials and tape during
installation.
■ The furnace may only be used indoors.
■ Materials developing harmful gases
must not be processed in this furnace.
■
This furnace must be plugged into the
proper grounded circuit. If you have
questions regarding the proper circuit,
contact a licensed electrician.
■ Any disruption of the protective con-
ductor, either inside or outside the
furnace, or any loosening of the
protective conductor connection may
lead to danger for the user in case of
a malfunction.
■ After any extended period without
use as well as high humidity or low
temperatures, it may not be possible
to generate a sufficient vacuum initially.
This is normal.
min. 0.5m
2 feet
0. Introduction