Zubler VARIO PRESS 300, Руководство по эксплуатации

Страница: 21 / 49

21
Page
Enter Esc
Main menu 1.
2 - PULSE MC CERAMAY
450C Edit 56-PULSE PTM 200/2
Program type I-Press
-Start temp 700C
-Heat rate 60C
-Final temp 920C
-Hold time 20:00
-Extra press time 0:00
-Max press time 10:00
-Pressure Low
-Vacuum level 720mm
-Opening time 0:00
-Edit done ? No
➍
The I -Press Program
Start temperature
Temperature in the firing chamber at which the program starts.
Heating rate Temperature increase per minute in order to reach the final temperature.
Final temperature Temperature at which the ceramic is pressed in the ring.
Hold time Period during which the ring is maintained at final temperature before pressing.
Extra press time
Additional press time after there has been no movement at the end of the I-Press Process.
Max. Press time Is the maximum press time desired. Once this time is reached, the press process will stop, independent of the sensor.
Pressure Select between low and high pressure (2 g pellets = low, 5 g pellets = high pressure 300g ring only).
Vacuum level Level of vacuum during the pressing program.
Opening time
Decent time of the lift from the chamber to the fully open position.
Edit done Saving of the program.
We always recommend
using the I-Press program
for pressable ceramics.