Chapter 7 External Cable Installation
Figure 7-17 Roll-up Self-mulching Laser Print Type II Labels
The meaning of label is shown in
Figure 7-16
.
Compared with transverse English labels on panels and plugs, the roll-up
self-mulching laser print type II label can only be used on plugs or panels whose
areas are larger than the label area. The roll-up self-mulching laser print type II label
is used when the cable plug size is smaller or using of the transverse English label
affects the cable’s appearance. It is pasted on the cable through the self-contained
cellulose tape.
l
Labels Pasted on Cables
à
Power Cable Label
A flag-type label worked out by ZTE can be used as an engineering marker for
power cables, as shown in
Figure 7-18
.
Figure 7-18 Power Cable Label
The paste position is 2cm from the lug. Firstly paste the label on the cable for
less than a half circle and then stick the backs of the two half parts of the flag-type
label. One such label must be pasted on each end of a power cable, as shown
in
Figure 7-19
.
7-31
SJ-20110803091932-002|2011-08-30 (R2.0)
ZTE Proprietary and Confidential
