Zte ZXC10 BTSB I1, Руководство по установке

Страница: 19 / 227

-iii-
Fig. 8.2-1 Assembly of thCC4Y-J32 Coaxial Cable Connector 8-5
Fig. 8.2-2 Coaxial Connector of the DDF 8-6
Fig. 8.2-3 Assembling DDF Coaxial Cable Plug 8-7
Fig. 8.3-1 Appearance and Wiring of an Impedance Converter 8-8
Fig. 8.3-2 Wiring of the Impedance Converter 8-9
Fig. 9.1-1 Structure of External Monitoring Cable of RFS 9-1
Fig. 9.2-1 Installing the Smog Sensor Base 9-3
Fig. 9.2-2 Installation of Temperature-Humidity Converter 9-4
Fig. 9.2-3 Location of the Infrared Sensor 9-5
Fig. 9.2-4 Structure of Infrared Sensor 9-6
Fig. 9.2-5 Structure of Infrared Sensor Cable 9-7
Fig. 10.2-1 Typical Structure of the Antenna Feeder System with Three Sectors 10-5
Fig. 10.3-1 Antenna Installation Flow 10-7
Fig. 10.4-1 Hoisting an Antenna 10-9
Fig. 10.4-2 Installing the KATHRAIN Antenna.................................................................... 10-11
Fig. 10.4-3 Adjusting the Pitch Angle of the Antenna 10-12
Fig. 10.4-4 Structure of the Feeder Window 10-14
Fig. 10.4-5 Structure of a BTSB Feeder 10-15
Fig. 10.4-6 Cutting Tool for the 7/8" Feeder Connector 10-16
Fig. 10.4-7 Cutting the Feeder with a Cutter 10-17
Fig. 10.4-8 Checking the Cutting Length of the Feeder 10-17
Fig. 10.4-9 Expanding the External Conductor of the Feeder with a Tube Expander 10-18
Fig. 10.4-10 Connecting the Front Part and the Back Part of the Feeder Connector 10-18
Fig. 10.4-11 Fixing the Front Part and the Back Part of the Feeder 10-19
Fig. 10.4-12 Pulling the Feeder Cable up the Iron Tower .....................................................10-21
Fig. 10.4-13 Three-feeder Clip 10-22