Zte ZXC10 BTSB I1, Руководство по установке

Страница: 145 / 227

Chapter 11 GPS Antenna Feeder System Installation
11-3
The GPS coaxial cable is peeled according to the dimensions shown in Fig.
11.4-1.
6.2
16.7
Fig. 11.4-1 Stripping GPS Cable
2. Welding core
Before welding the core wire, thread the parts with the cable in the sequence as
shown in Fig. 11.4-2. Then, weld the cable core with the pin. The shielding layer
of the cable should be opened and covered on the bush.
Pin
Insulating
gasket
Cable
shielding Jacket
Crimp
jacket
Nut Cable Core wire
Tin
soldering
Fig. 11.4-2 Welding GPS Connector Pin
3. Installing parts
After welding the core, install the parts on the case. The structure of the cable
assembly is shown in Fig. 11.4-3.
Insulating
gasket
Jacket
Crimp
jacket
Shell
Nut
Pin
Fig. 11.4-3 Structure of the N-J7A Cable Connection Part