Zte NCN 2001-EPI/CE, Руководство пользователя

Страница: 24 / 105

Chapter2 Installation
Confidential and Proprietary Information of ZTE NETVIEW
11
Note:
The wall where you will mount the brick camera must be
strong enough to bear 3 times weight of the camera and its
accessories.
3. Install Camera
Rotate the camera into the bracket by using the mount set
at the top of the camera. Adjust the camera to proper place,
and then tighten the knob on the bracket to fix the camera.
Finally, mount the lens onto the camera. Please pay
attention to the selection of C or CS lens mount.
F
I G U R E
8 M
O U N T O N
W
A L L
Ceiling Mounting
To install the device on ceiling, please follow these steps:
1. Unpack the camera and check if any appearance damage.
2. Install the bracket;
i. For cement wall surface, expansion screws need to be
installed first. The location holes for expansion screws
should be aligned with those on the bracket. Then install
the bracket.
ii. For wooden wall surface, install the bracket with tapping
screws directly. The wall where you will mount the brick