Zte NCN 2001-EPI/CE, Руководство пользователя

Страница: 42 / 105

Chapter3 Configuration and Operation
Confidential and Proprietary Information of ZTE NETVIEW
29
SIP port, etc, as shown in Figure 28. Set the IP address of the
camera device as: 192.168.10.62.
Note:
After IP address and port are set, restarting the camera
device is required to make the settings become effective.
F
I G U R E
2 8 I P / P
O R T
S
E T T I N G S
S e t t i n g i n T e l n e t W a y
To set IP information of the brick IP camera by using telnet,
perform the following steps:
1. Click Start > Run at the bottom left of your computer to
open the Run window, as shown in Figure 29. Enter “cmd”
in the Open field, and click OK to confirm.