AZT-9
ZPrAE Sp. z o.o.
35
LRW
Func
tion
Current criterion range
0,2
I
n
÷ 40
I
n
Return ratio
0,95
±
0,03
Current setup resolution
0,1
I
n
Delay time tdel
0 ÷ 300 s
Time setup resolution
10 ms
Time setup guaranteed error
±
(0,1%
t
nastawy
+ 5 ms)
SAT
Func
ito
n
Minimal level of detection of oversaturation
> 2
I
n
Time delay from oversaturation detection to
operation\
150 ms
C
om
m
un
ic
at
io
n
Basic communication RS-232 / ZP-6
Number of communication channels on the back panel (options depend on version of the MGB module):
Channel 1 MGB-9 A / B / C / D / E / F1 / G
RS232 – IEC870-5-103 / ZP-6
Channel 2 MGB-9 A / B / C / D / E / F1 / G
ST fibre optic connector – IEC870-5-103 / ZP-6
Channel 3
MGB-9 D
ST fibre optic connector – IEC870-5-103 / ZP-6
MGB-9 E
RS485 - Phoenix 8-pin-IEC 870-5-103 / ZP-6
connector
Channel 4
MGB-9 D
ST fibre optic connector – IEC870-5-103 / ZP-6
MGB-9 E
RS485 - Phoenix 8-pin-IEC 870-5-103 / ZP-6
connector
MGB-9 B / C
GPS – antenna connector SMA - NMEA
Channel 5
MGB-9 C / D / E / G
Ethernet - RJ-45 connector - IEC 870-5-103 / ZP-6
MGB-9 F1
Ethernet - RJ-45 connector, 2 × SC connector - IEC
61850
In
su
la
tio
n
Rated voltage of insulation:
250 V
Proof impulse voltage:
4 kV (1,2/50
µ
s)
Overvoltage category:
III
Insulation electrical strength:
2,5 kV; 50 Hz; 1 min.
Insulation electrical strength between output
sections of battery capacitors.
1,5 kV; 50 Hz; 1 min.
Enclosure protection degree
Front panel: IP50
Sidewalls and terminals: IP20
G
en
er
al
Ambient temperature range for storage
248 K ÷ 343 K (od -25 °C do +70 °C)
Ambient temperature range for operation
263 K ÷ 328 K (od -10 °C do +55 °C)
Ambient humidity
(with no water vapour condensation or ice):
95 %
Ambient pressure
70 kPa ÷ 110 kPa (0 – 3000 m npm)
Mechanical strength accordingly to PN-EN 60255-
21-(1,2,3)
class 1
K
Electromagnetic compatibility accordingly to PN-
EN 60255-26
class A
Dimensions: (one chassis)
Another chassis multiply dimension
19”/3U/240 (483×133,5×245 mm), W×H×D
Weight (one chassis)
Ca. 4 kg (depending on number of odules)
A
ddi
di
ona
l
Po
w
er
suppl
y
(opt
ion
)
Additional power supply from current transformers (option)
Rated input voltage
U
Wn
57 V AC
Permissable input voltage range
(0,7 ÷ 1,15)
U
Wn
Power consumption of voltage input circuits
without auxiliary power supply
< 8 VA / (phase input) – 3-phase power supply
< 15 VA / (phase input) – 1-phase power supply
M
TT
-10
TE
ST
M
odu
le
(o
pt
ion
)
Activating threshold for indication LEDs
Storage level > 70% of nominal capacity
Available test inputs and outputs
sockets 1 to 8, measuring inputs – current
sockets 9 to 11, BAT-1 storage outputs
Test load for energy storages
2 × 160 Ω
