AZT-9
ZPrAE Sp. z o.o.
21
Fig. 5.1. Main window of the program.
Before work with the software is started a connection to the device should be
properly configured, unless the program had been used before and the configuration was
saved. In order to introduce changes make the following selection in the main menu:
OPTIONS and then CONNECTION PARAMETERS, and a port and connection speed
selection window will appear.
Fig. 5.2. Connection parameters window.
Depending on the version of the MGB concentrator the user can send data over
various physical interfaces: RS232, RS485, Ethernet.
If a serial port is to be used select: "serial port", then select an “even” value, then
select the correct COM port number and transmission speed, which is by default set to
115200 bps.
