ZPE Nodegrid Bold SR, Руководство пользователя

Страница: 141 / 227

Setting Options Description
Primary Connection Interfaces
List of all available network interfaces. One
needs to be selected
Secondary
Connection/Tertiary
Connection
Interfaces
List of all available network interfaces. One
needs to be selected
Trigger
Unreachable
Primary
Connection IPv4
Default Gateway
Unreachable IP
address
Based on the setting the system will either
check the availability of the default gateway
or of an address which can be specified
Number of failed
retries to failover
Number
Amount of failed tries to reach the trigger
address. This value will be used to trigger a
failover.
Number of
successful retries to
recover
Number
Amount of successful tries to reach the
trigger address. This value will be used to
trigger a fallback.
Interval between
retries (seconds)
Number
Amount of time which will be waited
between tries
The system supports configuration of Dynamic DNS for the failover interfaces.
IP Forwarding
IP Forwarding can be used to route network traffic between network interfaces. The
behavior of the routing traffic can be further adjusted using firewall settings.
IP Forwarding can be enabled independently for IPv4 and IPv6.
Loopback Address
The Nodegrid system allows configuring a Loopback address for IPv4 and IPv6 if required.
The address configured is assigned with a bitmask of /32 (IPv4) or /128 (IPv6).
Network Connection Configuration
The network connection configuration allows administrators to edit, to add and delete
existing network configurations. The Nodegrid solution will automatically add all existing
physical interfaces. The following physical interfaces exist, depending on the model.