ZOTYE JNJ6460BK, Руководство пользователя

Страница: 275 / 294

Accident handling
275
Jump starting
If the storage battery is run out or lacks of power to start up the vehicle, you can turn
to another vehicle and jumper cable for a help. Make sure that the following
procedures are followed for safety.
1. Switching the one-key start switch to OFF to turn off all the lights and electric
accessory except hazard warning light (if necessary) in two cars.
2. One terminal of red positive electrode (+) cable is connected to the binding post
(A) of the positive electrode of the vehicle that is started by jumper cable.
3. No another terminal of red positive electrode (+) cable should never be in
contact with metals. but to be connected to the positive electrode (+) of storage
battery(B).
4. One terminal of black negative electrode (-) of cable is connected to the
negative electrode (-) of the charged storage battery (C). Before moving to the next
step, the other terminal is forbidden to be in contact with any substances. The other
terminal of negative electrode (-) is forbidden to be in contact with electroless
storage battery but to be connected to the unpainted metal of engine for the
electroless storage battery vehicle.
5. The other terminal of negative electrode (-) is connected with the unpainted
metal (D) of energy with electroless storage battery without in the vicinity of
operating members of engine and storage battery.
6. Staring up the engine of another vehicle.. Slightly increasing speed of the
engine and keeping it for 5 minutes to charge the vehicle.
7. Keeping the speed of engine of another vehicle while starting up your own
vehicle.
8. After starting up the engine, disassemble of the jumper cable In an order totally
reversed from the assembling, meanwhile please come to check the vehicle at the
special service station of our company as soon as possible.
Manipulation Safety Driving guidance Operating guide DIY Technical data Index