ZOTYE JNJ6460BK, Руководство пользователя

Страница: 143 / 294

Driving Instructions
143
* Constant speed cruise
Descriptions
When driving on the highway with fewer vehicles for a long time, this function can
be used to reduce the driver’s exhaustion, meanwhile to reduce unnecessary speed
variation and save fuel.
ON/ OFF (oepn/ close): Rotating the switch of constant speed cruise to start the
cruise system; Then rotating this switch again to close the cruise system.
CANCEL: Pushing the handle towards the direction of steering wheel to cancel
cruise control.
RES/+ (Restoration/Acceleration): On the condition of constant speed cruise,
pushing RES/+ upward intermittently or successively to achieve acceleration. On the
condition of canceling constant speed cruise, pushing RES/+ upward intermittently
to restore as the previously set speed.
SET/- (Settings/ Deceleration): On the condition of constant speed cruise, pushing
SET/- backward intermittently or successively to set the speed or deceleration.
Alarm!
Under the following conditions, the function of constant speed cruise is not
permitted to use:
●
Driving in the downtown;
● Driving in mountainous areas;
● Driving in rainy,ice and snowy weather;
● The traffic conditions with more vehicles.
Setting vehicle speed
Rotating the switch of ON/OFF, when starting cruise control, the indicator lamp
of cruise state and fault on combination instrument will be lighted to set cruise
speed.
1. The vehicle speed will be accelerated above 40km/h (below 180km/h).
2. Pushing the handle towards the direction of SET/-, then releasing to store and
keep current speed.
3.
Moving the foot from acceleration pedal, the vehicle will run and keep in set
speed, and the indicator lamp of cruise operation on combination instrument will
be turned on.
Manipulation Safety Driving guidance Operating guide DIY Technical data Index