272
Accident handling
There is an overheat for the vehicle
Overheat of a vehicle actually means that the temperature of the cooling liquid of
motor is too high, and it shows an overheat in motor if the water temperature alarm
light
flashes on the combination instrument, then following measures should be
taken:
1.
Driving the vehicle to a safe place and turning on the hazard warning light. The
shift level of the transmission should be changed to N neutral position and electric
parking switch be pulled up. Turning off the air conditioner if it’s on work.
2.
The cooling liquid or steam ejecting from the radiator or expansion tank will
cause the motor to flameout. Opening the hood of the motor till the steam clears off.
If no cooling liquid or steam ejects, the motor should be kept in a working state and
making sure the cooling fan is in an operation state. If the cooling fan is out of work,
one should switch the power to OFF
3.
Inspecting by eyes whether the transmission belt (belt for water pump) is broke
or slacked. Inspecting whether there is an obvious leakage of cooling liquid in the
radiator, hose and below the vehicle. It’s normal to have water dropping from the air
conditioner that is on working.
4.
If the transmission belt of the motor breaks or leaks with cooling liquid, the
motor must be closed immediately and please contact with the special service station
of our company.
5.
If there is no obvious problem and leakage in the transmission belt of the motor,
inspection of the expansion tank containing cooling liquid. Moderate amount of
cooling liquid should be injected in the expansion tank if it is run out while the motor
is under work.
6.
When the cooling liquid of motor is reduced to a normal temperature, the level
of cooling liquid in the expansion tank is checked again. It shows there is a leakage
in the system if the cooling liquid largely runs off. Please immediately contact the
special service station of our company for inspection and maintenance.
Alarm!
●
To keep the hood of motor in a close state to refrain people from injury
till no steam is generated, since the effluent steam or cooling liquid shows a
high pressure.
●
The cover of radiator cannot be removed as the engine and radiator are
under high temperature. Ejected high-temperature steam and liquid will cause
severe hurt to people.
●
Hands and clothes should be isolated from the fan and transmission belt
of engine that is under work.
Содержание JNJ6460BK
