ZOTYE JNJ6460BK, Руководство пользователя

Страница: 208 / 294

208
Traffic and environment
Run-in period Driving instructions in run-in period
In order to ensure the service life of the vehicle, the vehicle should be conducted
running-in in the initial operation before normal use.
Provision of run-in period
● During the first driving, wax and oil will evaporate from the exhaust system,
and then it will generate smoke. After the first driving, the vehicle shall be parked
outdoors for some time to prevent personnel from inhaling these smoke.
●
In the run-in phase, fuel and engine oil consumption may be higher.
● Avoid high-speed running of engine operation.
● Select better road to drive in de-loading and speed limit, and it is prohibited
to drive under full-open throttle or rapid acceleration.
●
Do not drive manual transmission cars at higher gears and low speed, and
please shift gears in time.
Do not overload
During the run-in period, please do not reach the highest load quality, otherwise it
will cause serious damage to the parts that do not reach good run-in.
● For 0 - 800km, do not reach 50% of the maximum load.
● For 800-2000km, do not reach 70% of the maximum load.
Do not drive long distances
During the run-in period, please do not drive long distances. If the engine
continuously works too long, it will cause mechanical wear.
Avoid emergency braking
Minimize the number of emergency braking, otherwise the braking system will be
impacted, while increasing the impact load of the chassis on the engine. Try to
avoid emergency braking within the previous 300km of the run-in period.
Avoid towing the vehicle
If there is a problem with the vehicle, it should be transported by platform–type
trailer. It may damage the vehicle due to towing of vehicle by ropes or cables.