Zoom ISDN TA, Руководство пользователя, Страница: 19 / 63

Chapter 2 Installation 19
what COM port your modem is set to. To do this, open the My
Computer icon on your screen (if it’s not already open). In the
My Computer dialog box, double-click the Control Panel
icon. Inside the Control Panel dialog box, double-click the
Modems icon.
6. In the Modems Properties box, select this product, which
should be listed as a modem found by the system. Then click the
Properties button. Your modem’s properties are listed in a
Properties dialog box. Next to Port is shown a COM number.
Make a note of this COM port number below or in another easy-
to-find place.
COM port: ___________
7. In Windows 95, you can test your TA/V.34 or TA as follows:
While still in the Modems Properties dialog box, test the
modem by clicking on the Diagnostics tab. Choose More Info .
You will see a list of responses. If the entry for ATI 3 contains
the name of your TA/V.34 or TA, your new ISDN card is
properly set up. You may ignore any error messages. Click
OK .
(If your modem is not responding, see the section General
Troubleshooting beginning on page 37.)
Close both Properties windows by clicking OK until you get
back to the Control Panel . Skip to step 10.
8. In Windows NT 4.0 Server, if you have previously set up Dial-
Up Networking, a
Modem Setup box will appear when you
click OK to exit the Modems Properties dialog box and then
click Close to exit the Modems dialog box. The Modem Setup
dialog box will indicate “Dial-Up Networking needs to be
Click Yes . Dial-Up Networking displays the Remote Access
Service.
In the Remote Access Setup box select TA/V.34 or TA
Internal and click Continue for it to automatically configure
your setup.
Note: If you don’t have Remote Access Service installed, you must
do so to use the Internet or other remote access servers. Refer
to your Windows NT user documentation for installation
instructions.