Using
the
Jam
P
lay
F
eature
When the JAM PLAY effect is selected for the DLY/REV
module, the expression pedal and CONTROL switch are
automatically assigned to the jam play feature.
5.
Store the patch and return to play mode.
In play mode, when a patch is selected where jam play can be
used, the DLY/REV key flashes.
6.
To activate jam play, push the expression pedal fully
down in play mode, or press the CONTROL switch in
manual mode.
The GFX-8 enters the jam play mode and goes into the
recording standby condition. The display shows "STOP", and
"JP" flashes on the GROUP/BANK indicator.
7.
While playing your instrument, press the REC foot
switch (foot switch 3).
The indication "RECORDING" scrolls on the display and
recording starts.
For jam play, the recording source signal is always the
processed effect signal. When "nM" or "rS" is selected as
STYLE parameter, the expression pedal can be used to adjust the
input signal level.
8.
To stop recording halfway, press the
foot switch
(foot switch 2).
Recording stops, and playback starts according to the selected
settings.
When the
foot switch was not operated, recording stops
automatically after 12 seconds have elapsed, and playback
starts according to the selected settings.
9.
Use the
foot switch (foot switch 2) and
expression pedal to control playback/stop of the
recorded phrase.
When "SC" was selected as STYLE parameter, the expression
pedal can be used for scratch playback. If "nM" or "rS" was
selected as STYLE parameter, the expression pedal can be
used to control the jam play volume.
To record a new phrase, repeat steps 7 - 9.
10.
To terminate jam play, press the expression pedal
once more fully down, press the EDIT key, or press
the CONTROL switch.
HINT
HINT
33
ZOOM GFX-8
