Zoning Zity, Инструкция по установке и обслуживанию

Страница: 13 / 24

sϴ͘Ϯϭ
ϭϯ
/dzŽŶƚƌŽůhŶŝƚ
2.3.B ZEBRA thermostats with ZITY-W (by wire)
1 Connect the thermostats and the control unit via the following steps:
·
For the Master thermostat: define a single Master per installation.
Configure menus 5 (Master/ Slave), 6 (Flexifan), 9 (Actives Modes), 14 (Zone Number) and 16 (Keypad Lock):
For the Slave thermostat: Only configure menus nº5 (Slave) and nº14 (Zone number):
Ύ
Valid values for the ZEBRA V2 (7 wires) in the case of having a ZEBRA V1 (4 wires) see the advanced setting.
For more information on other menus, see the advanced settings.
Go to menu 5 Access settings
Access the
parameter
Master/Slave:
Place in position 1
Flexifan: Place
in ON position
Go to menu 9
(Actives Modes)
Actives Modes:
Place in position 2
Go to menu 14
(Zone ID)
Access the
parameter
Select the Zone
Number
Go to menu 16
(Type of Locking)
Place in 0 Confirm and Exit
Turn off the
thermostat
Access the parameter
Go to menu 14
(Zone ID)
Access settings Select the zone
number
Confirm and Exit
Access the
parameter
Access the
parameter
Ύ
Valid values for the ZEBRA V2 (7 wires) in the case of having a ZEBRA V1 (4 wires) see the advanced setting.
For more information on other menus, see the advanced settings.