ZoneVu ZVK-007, Руководство пользователя

Страница: 20 / 30

MEYERTECH LIMITED ISSUE 09
Page 20 http://www.meyertech.co.uk MAN-007
6.7 ZVR CONFIGURATION
ZVR CONFIG allows camera receivers to be configured from the comfort of the keyboard by utilising
the camera receiver OSD (On Screen Display)
The display will show
SUPERVISOR CONFIGURATION
LEVEL ZVR CONFIG
STEP 1 Press the ENT key the display will show
SUPERVISOR 510 CONFIG MONITOR-1
LEVEL ESC TO EXIT CAMERA -1
STEP 2 Select the camera you want to configure using the numeric keypad and pressing the
ENT key.
STEP 3 Press the MODE key. The display will change to
SUPERVISOR 510 CONFIG MONITOR-1
LEVEL PROG TO SELECT CAMERA -1
STEP 4 Press the PROG key to select the type of receiver: ZVR- 510 , ZVR- 530 , or ZVR- 500
STEP 5 Press the MODE key. The display will change to
SUPERVISOR 530 CONFIG MONITOR-1
LEVEL PROG TO CONFIG CAMERA -1
STEP 6 Press the PROG key to access the camera receiver OSD. The display will show
ACCESS GRANTED
and then
ZVR TALK MODE
STEP 7-8 The operation of the menus varies according to the receiver type.
ZVR-510 / 500
STEP 7 Follow the OSD Menus to configure the camera receiver. Select fields by pressing the
alphanumeric key corresponding to the capitalised letter in the field name, and
pressing
Enter , or move between fields using the Pan/Tilt joystick and then pressing
Enter . Once a data field is selected, the Space key toggles its value, or alpanumeric
data can be entered directly. The Shift key toggles between alpha and numeric
modes and the DEC key between upper and lowercase text.
STEP 8 When you have completed configuring the camera receiver exit all menus until the
Main menu is displayed. Select either Save changes or Abandon changes, and press
Enter . Now press the ESC key to exit ZVR CONFIG .
INFO Use the joysticks to position the camera head when requested to do so by the menu -
this will be indicated by the flashing word HOME.
ZVR-530
STEP 7 Follow the OSD Menus to configure the camera receiver.
The currently selected option is shown in flashing text: Use UP and DOWN to move
the selection, and press SELECT to choose the current selection.