MEYERTECH LIMITED
ISSUE 09
STEP 5
To enter a Monitor Press the
MON
key and use the numeric keypad to enter a number
in the range 1 - 64 followed by the
ENT
key.
STEP 6
To enter a Camera use the numeric keypad to enter a number in the range 0 - 512
followed by the
ENT
key.
STEP 7
Repeat STEPS 4 - 6 to configure an entire ZONE. Repeat STEPS 1 - 3 to select
another ZONE.
INFO
Monitors and Cameras entered in locations above the ZONE SIZE will be ignored
when the ZONE is selected in CLASIK MODE.
INFO
To EXIT ZONE CONFIGURATION press the ESC key.
6.6 FEATURE ACCESS
FEATURE ACCESS
configuration enables and disables a
USER LEVELS
to the following keyboard
features
GLOBAL
PRESETS
PATROL
HOME
ALARMS
ZONAL
SWITCHING
The display will show
SUPERVISOR
FEATURE
ACCESS
LEVEL
ESC
TO
EXIT
The first thing we have to do is select the
USER LEVEL
whose
FEATURE ACCESS
we wish to
configure
STEP 1
To select the desired
USER LEVEL
press the
MODE
key to cycle through the three
USER LEVELS
STEP 2
When the required
USER LEVEL
is displayed press the
ENT
key the display will
show
SUPERVISOR
FEATURE ACCESS
USER LEVEL 1
LEVEL
ESC
TO
EXIT
STEP 3
Press the
MODE
key to cycle through each
MODE
category. The display will show
each category and current access status for the
USER LEVEL
selected
SUPERVISOR
MODE ACCESS
USER LEVEL 1
LEVEL
GLOBAL
GRANT
ACCESS
STEP 4
To change the access status for a particular category press the
PROG
key the display
will show
SUPERVISOR
MODE ACCESS
USER LEVEL 1
LEVEL
GLOBAL
DENY
ACCESS
INFO
Each press of the PROG key will toggle the status between DENY and GRANT
STEP 5
Press the
ESC
key to exit
MODE ACCESS
Page 19
http://www.meyertech.co.uk
MAN-007
