8
4) Water Connection
NOTE:Be sure to use the new hose-sets supplied with the appliance to connect to
water mains and that old hose-sets should not be reused.
1.Connect the water supplying hose to the unit
1) First remove the clipper on the water inlet port for water supply (indicated in the
following illustration “B”) located at unit back, then pushing inwards the anti-dusty plug,
use your other hand’s finger to press the out circle to fix the anti-dusty plug, then take
down the anti-dusty plug.
2) Insert the one end of the white water hose into the water inlet port, and push inward
completely, and install back the clipper, then water hose connection is completed.
Important: The water pressure of main water supply system must be 0.04-0.6 MPa at
least.
2
、
Connecting the water drain pipe
Pull out the water drainage cap with black color (indicated
A
in above illustration), then
connect the white drainage pipe included in accessory, again connect the other end of this
drainage to the main water drainage pipeline.
3. Connect the water hose to the water faucet of the water main supply system
1) Install the supplied water quick-connector to the water faucet by screw thread.
2) Remove the clipper from the water quick-connector, insert the another end of the water
hose into this quick-connector port completely, then install back the clipper, also this step
is completed.
Press inward the
active out
circle,then remove
the anti-dusty plug
Remove the
clipper first
Then install
back the clipper
White water
hose(accessory)
First insert the
water hose inward
completely
Water inlet port on
the unit back
STEP 1: Remove the
anti-dusty plug
STEP 2: Insert the
water hose
STEP 1:Qucik-connector
and the water faucet
STEP 2:Screw the qucik-connector on the
water faucet by the screw thread, and
remove the clipper
STEP 3:Insert the water hose completely
STEP 4:Install back
the clipper
Push inwards
Remove the
clipper
