4
2) Operation panel
A.
“
TIMER CLEAN” button
1) Quickly press this button once, to enter the
Timer setting program.
2) Press this
“
TIMER CLEAN”
button for more
than 5 seconds, to enter the Self-cleaning
program.
B.
“
ON/OFF
”
button
1) When the unit is off, press this button to turn
on the unit.
2) During the Self-cleaning program, or normal
ice-making state, press this button to turn off the
unit at once.
3) If the unit is set with the Timer, press this
button to cancel the Timer setting.
4) When the unit is making the ice cube, press
this button for more than 5 seconds, the unit will
switch to ice harvest process by force.
C. LCD display window
1. Ice making time countdown display and environmental temperature display. Display
ice-making time countdown with M as the unit display, and display environmental
temperature with F as the unit display.
2. Making ice and deicing symbol display. The machine is making ice when the symbol
rotate, and the machine is deicing when the symbol flash.
3. Self-cleaning symbol display
4. On/off symbol display
5. Error code display. E1 means the environmental temperature sensor is damaged, E2
means ice making anomaly or the refrigerant leaked.
6. Water flow in and water shortage display. The arrow flashing indicates water is flowing
into the machine, the whole symbol is bright, indicates the machine is short of water.
7. Ice full alarm. The machine will make ice again when you take out the ice.
8. Setting display. Display ice making time setting with M as the unit display, and display
timing switch machine with H as the unit display.
D&E.
“
+
”、“
-
”
button
1) Use to adjust the ice-making process duration period length, the default setting is zero,
1 minute adding or decreasing per each pressing of
“
+
”
or
“
-
”
button.
2) Also to adjust the delay time of the timer, the default setting is zero, 1 hour adding or
decreasing per each pressing of
“
+
”
or
“
-
”
button.
ON/OFF
TIMER
CLEAN
+
-
