9
5-OPERATION THE UNIT
1) Operation The Ice-Making Process
Operation button and display area diagram
1. Starting up
1) Plug in the power plug, the
symbol will flash in the display window.
2) Press the ON/OFF button on the control panel, the external pipe can add water to the
water tank through the electromagnetic water valve, after reaching the standard water
level, the machine will start to make ice, then the
symbol will change to light on
always in display window and
symbol rotate.
3) The ambient temp will be displayed in the upper left of the display window, “80
℉
”means
the ambient temp is 80
℉
, several min later, the flashing numbers will be displayed in the
ambient temp display area, the flashing number “10M” means still need 10 min to finish
this ice making cycle.
2. Ice making cycle
1) Every ice making cycle finished, entering the deicing process, the
symbol flash,
the external pipe can add water to the water tank through the electromagnetic water valve,
and the arrow on the
symbol will flash until the water reach the standard level, then
the
symbol extinguish, the unit enter the next ice making cycle.
2) When the water can't reach the standard level, the
symbol is always bright,the
OPERATION
AREA
OPERATION
AREA
DISPLAY
AREA
+
ON/OFF
TIMER
-
CLEAN
