ZOJE QD2622 Series, Руководство пользователя

Страница: 15 / 24

6
Technician parameter (Press [P] key and power on to enter)
P-26
The stitches number
between two sensors
1-600 100
Cycle period parameter. In a circle the rear sensor
receive signal then can continue running, otherwise a
cycle stop.
P-27
The delayed stitches
number of front trimming
0-50 30
the smaller value the more in advance, thread will
retain more longer. (Mid-sensor trigger )
P-28
The delayed stitches
number of Rear trimming
0-50 4
The small value the more in advance, the short of
end-thread (Back-sensor trigger)
P-30
The delayed time of front
suction off
（
ms
）
100-5000 100 The small value the close is fast.
P-31
The delayed time after
trimming suction. (ms)
100-5000 300 The small value the close is fast.
P-32
The times when
cloth-pulling ON
0-50 20
P-34
Trimming protection by
manually
0-1 1 0
：
OFF 1
：
ON
P-35
The delayed stitches
number before the machine
stops (Stitches)
1-99 1
(Valid for Back-sensor OFF condition
）
After through cloth back-sensor how many stitches
will stop the machine automatically.
P-36
The response time of front
sensor (ms)
10-990 50
Front sensor trigger time: the small value the response
is fast, the large value the response is slow.
P-37
The sensitivity of front
sensor
0-700 380
In order to adapt different cloth material setting front
sensor receive strength.
P-38
The sensitivity of middle
sensor
0-700 440
In order to adapt different cloth material setting
mid-sensor receive strength.
P-39
The delaying time of front
presser foot lifter
（
ms
）
100-2000 300
（
Under the full automatic/ semi-automatic
）
Front trigger retention time after auto-foot-lifting, the
larger value the longer retention time.
P-40
Starting time for rear
presser foot lifter
（
ms
）
0-2000 120
The starting time of rear presser foot lifting, the
smaller value the faster of response.
P-41
Full-on time setting for
presser foot
（
ms
）
10-990 100
The larger value the higher of foot-lifting (Noted: Not
too high)
P-42
Duty-cycle time setting for
presser foot
（
%
）
10-90 20
Adjustment for duty-cycle of AFL. Fine tuning can
reduce the over- heating.
P-43
The time for the presser
foot laying down
（
ms
）
10-990 100 The action time of presser foot laying down sequence.
P-44 Presser foot protection(s) 1-120 5
Stop on the sewing the presser foot lifting, stop after
trimming presser foot lifting, positive closing after
heeling pedal for retention time.
P-45 Trimming time
（
ms
）
10-990 40 the longer time, the greater trimming pressure
P-46
Suction when continuous
feeding
0-2 0
0
：
No suction 1
：
Long suction
2
：
Synchronizer suction
P-47 Total pieces 0-65535 0