ZOJE QD2622 Series, Руководство пользователя

Страница: 17 / 24

8
want effects.
Senior parameter setting ( press P + S key at the same time to turn on the machine access)
P-70 Model selection 0-1 0
0
：
Horizontal knife type 1
：
Side knife type
P-71
Maximum sewing speed
limitation
（
r/min
）
100-8000 6000 Maximum sewing speed limitation
P-72
Manually up positioning
adjustment
0-1439
Through hand-wheel direction, clockwise turn
hand-wheel to up position press [S] to save the current
value.
P-73
Manually down positioning
adjustment
0-1439
Through hand-wheel direction, clockwise turn
hand-wheel to down position then press [S] to save
current value.
P-74 Parameter reference 0-4 1
Use up and down key shift:
N1
：
Control box software version
N2
：
Panel software version
N3
：
Rotation
N4
：
Pedal AD
P-75 Alarm pieces 0-9990 0
P-76
Alarm pieces plus minus
sequence
0-1 0 0
：
minus 1
：
plus
P-77 Zero-point angle setting
Firstly to enter P-48 close the needle goes up as power
on, turn off the machine then restart the machine,
enter this item press automatic to find zero-point,
till machine stops, press key to save, then enter
to P-48, turn on the needle goes up as power on.
P-78 Suction bucket type 0-2 1 0
：
with brush 1: without brush 2
：
valve
3.2 Side knife type system parameter setting
User Parameter ( Under the normal mode press P key to access)
No Function parameters Range Default Description
P-01
Maximum Sewing Speed
（
r/min
）
100-6000 5000
Maximum sewing speed setting
P-02
Needle stop positioning
selection
0-1 0
0
：
Up needle position
1
：
Down Needle position
P-03 Start sewing speed
（
r/min
）
100-6000 4000
With trimming function: the speed setting for front
sensor trigger start-up and Back sensor signal finish
(before trimming)
P-04 Start-up mode 0-1 1
(Valid for full-automatic mode)
0
：
Automatic mode
（
start-up
）
1
：
Foot control mode
（
Start-up by Front toe
down the pedal
）