ZOJE QD2622 Series, Руководство пользователя

Страница: 22 / 24

13
2) When the supply voltage is too high exceed the rated voltage. )
If correct, please replace the control box and
inform the factory
E02
1) When power ON, detected main voltage too low.
2) When the supply voltage is too low.
Turn off the system power supply, and detect
whether the supply voltage is correct. (Or
exceed the rated voltage)
If correct, please replace the control box and
inform the factory
E05
Speed control unit connection is abnormal
Turn off the system power supply, please check
the speed control unit connector if loose or fall
off, Will resume normal after the restart system
If you still can not work normally, please
replace the speed control unit and notify the
manufacturer.
E07
a)
Bad connection at the motor connector.
b) Machine locked or object stuck in the motor
pulley
c) Sewing material is too thick.
d) Module output is abnormal.
Please check the machine head to see if objects
stuck in the motor pulley. If stuck it is not the
machine head machinery fault.
If normal running, please check the encoder
connector and motor power cord connector if
loose. If loose please tight connection.
If connection well, please check supply voltage
whether abnormal or setting speed too high. If
have please modify.
If normal, please replace the control box and
notify the
manufacturer.
E10
Solenoid over-current protection
Turn off the system power supply, please check
the solenoid (solenoid valve) connector or
solenoid (solenoid valve) is broken or not.
E11
Synchronizer signal error.
Turn off the system power supply, please check
motor encoder connector if loose or fall off,
renew to normal then restart system. If still not
work, please replace the motor and notify the
manufacture.
E14
Encoder signal error.
Turn off the system power supply, please check
motor encoder connector if loose or fall off,
renew to normal then restart system. If still not
work, please replace the motor and notify the
manufacture.
E15
Abnormal over current protection for Power
Module.
Turn off the system power supply, renew to
normal then restart system. If still not work,
please replace the motor and notify the
manufacture.