ZOJE QD2622 Series, Руководство пользователя, Страница: 21 / 24

12
P-65 The strength of mid-sensor 0%-100% 80% Adjustment mid-sensor strength
P-66 The strength of back sensor 0%-100% 80% Adjustment back sensor strength
P-67
The sensitivity of back
sensor
0-700 440
In order to adapt different cloth material setting
back-sensor receive strength.
P-68
Cutter speed by manually
（
r/min
）
100-6500 1000
P-69
Response time of back
sensor
（
ms
）
0-3000 0
Response time of back-sensor, when sewing such as
mesh cloth can adjust this item, then can achieve you
want effects.
Senior parameter setting ( press P + S key at the same time to turn on the machine access)
P-70 Model selection 0-1 1 0
：
Horizontal knife type 1
：
Side knife type
P-71
Maximum sewing speed
limitation
（
r/min
）
100-8000 6000 Maximum sewing speed limitation
P-72
Manually up positioning
adjustment
0-1439
Through hand-wheel direction, clockwise turn
hand-wheel to up position press S to save the current
value.
P-73
Manually down positioning
adjustment
0-1439
Through hand-wheel direction, clockwise turn
hand-wheel to down position then press S to save
current value.
P-74 Parameter reference 0-4 1
Use up and down key shift
：
N1
：
Control box software version
N2
：
Panel software version
N3
：
Rotation
N4
：
Pedal AD
P-75 Alarm pieces 0-9990 0
P-76
Alarm pieces plus minus
sequence
0-1 0 0
：
minus 1
：
plus
P-77 Zero-point angle setting
Firstly to enter P-48 close the needle goes up as power
on, turn off the machine then restart the machine,
enter this item press automatic to find zero-point,
till machine stops, press key to save, then enter
to P-48, turn on the needle goes up as power on.
P-78 Suction bucket type 0-2 1 0
：
with brush 1: without brush 2
：
valve
4
．
Error Code List
Error Code
Problem
STATUS / MEASUREMENT
E01
1) When power ON, detected main voltage too
high
Turn off the system power supply, and detect
whether the supply voltage is correct. (Or