ZOJE A5300, Инструкция по эксплуатации

Страница: 17 / 39

Fig.19
D
C
B
A
E
Operating t
he Treadle(Fig. 19)
16
1.The treadle has 4 operation levels :
1)The machine runs at low sewing speed w
-hen you lightly depress the front part of the p
-edal. (as show in the picture B)
2)The machine runs at high sewing speed w
-hen you further depress the front part of the p
-edal.(as show in the picture A)
3)Penal back to the initial position when sto
-p stepping on it and the machine stop workin
-g.(needle in the upper or down position)(as s
-how in the picture C)
4)The machine trims threads when you fully
depress the back part of the pedal.(as show in
the picture A)
5)When the auto-lifer is used,one more ope
-rating switch is provided between the sewing
machine stop switch and thread trimming swit
-ch.The presser foot goes up when you lightly
depress the back part of the pedal(D),and if y
-ou further depress the back part,the thread tr
-immer is actuated.
-13-
17
Adjusting the Treadle(Fig. 20, Fig. 21, Fig. 22)
1.Adjusting the angle of treadle
1)Adjust the angle of treadle only by adjusti
-ng the length of treadle connecting rod: unsc
-rew screw
①
, and adjust the length of treadle
connecting rod by moving upward/downward
the upper connecting rod
②
and lower connec
-ting rod
③
.
2)Screw down screw
①
when adjustment is
over.
①
②
③
Fig.20
ZOJE Europe 2022