ZOJE A5300, Инструкция по эксплуатации

Страница: 33 / 39

-e upper wheel, and the front end stationary tr
-immer
⑧
and cutting edge of movable trimm
-er
⑦
shall be engaged for 0.2~0.5mm when t
-hread-trimming driving crank lever
⑥
drives
movable trimmer
⑦
to perform thread-trimmi
-ng action. If no engagement is achieved, uns
-crew screw
⑤
and move thread-trimming dri
-ving crank lever
⑥
to engage the front end st
-ationary trimmer
⑧
and cutting edge of mova
-ble trimmer
⑦
. The adjusted positions of mo
-vable trimmer
⑦
and stationary trimmer
⑧
m
-ust ensure that cotton thread 203 can be snip
-ped when manual thread-trimming is conduc
-ted.
Caution:
1.To prevent the unexpected startup
of sewing machine, trim off the pow
-er supply before the operation is co
-nducted.
①
②
③
A
The use of clearance hole cover (Fig.44)
33
1.When not in use the cutting knife , please
unload the two cloth scraps guides screws
①
and cloth scraps guides
②
first,then put the cl
earance hole cover onto the plate
③
, press th
-e A section from above.
2 .After clearance hole cover firmly covered
, you can make an ordinary sewing machine u
-se.
Caution:
1.To prevent the unexpected startup
of sewing machine, trim off the pow
-er supply before the operation is co
-nducted.
Fig.44
-29-
3 4
Cutting knife (Fig.45, Fig. 46)
1.The operation of cutting knife
1) When moves, turn cutting knife cutting k
-nife cutting switch knob
①
down,then make t
knife switch knob with red engraved point A al
-ign red marker dot B knob,The cutter is go
⑤
-ne down and the machine is driven at the sa
-me time.
2
)
Let cutting knife stop the action, convert
ZOJE Europe 2022