ZOJE A5300, Инструкция по эксплуатации

Страница: 12 / 39

-8-
1.Hold the rotating hook by hand, and fit t
-he bobbin into the rotating hook.
2 .Thread the thread through the thread gro
-ove A in the rotating hook, and draw out the t
-hread in direction C. In this way, the thread is
led out of hole B through the tension spring.
3.When bobbin thread is drawn, the bobbin
shall turn clockwise in direction of arrow.
Fig.10
①
Installation of bobbin case (Fig. 10)
9
1.Turn the machine pulley to raise the needle until it is above the needle plate.
2 .Hold the bobbin case
①
(with bobbin) with one hand, then install the bobbin case into the
hook.
Caution:
1.To prevent the unexpected startup of sewing machine, trim off the power supply
before the operation is conducted.
10
Winding up the Bobbin Thread (Fig. 11, Fig. 12)
1.Bobbin thread winding-up method
1) Fit bobbin
①
onto spool
②
.
2
)
Thread the right-hand thread coiling on
thread stand as shown in right-hand figure,a
-nd reel the thread end rightwards onto the b
-obbin for several turns.
3
)
Push winding lever
③
over to direction
A, and run the sewing machine. Bobbin
①
is
rotated in direction C, and thread is reeled o
-nto bobbin
①
. Once the reel is full, winding
lever
③
is pushed toward direction B, and wi
-nding is over.
4
)
Remove bobbin
①
, and trim off the thre
-ad using winding trimmer
④
.
ZOJE Europe 2022