14
2
．
Sewing Operation
Example: Sew the C1 pattern.
After the sewing, if user wants to go to the previous pattern or the next pattern, user can press
&
when the Sewing LED is on. Then the pattern display will be changed and
the presser will also move to the start point
·After storing the patterns among C1
～
C20, if the P pattern in P1~P50 id changed, the
content of P pattern with same code will also be changed.
。
Confirmation of pattern is necessary for each pattern.
2.4 Debugging Mode
Via this mode, user can perform the operations of maintenance and checking.
1
）
When the Sewing LED is off, press
to call the display of
. Then press
at same time. After the ring of buzzer, the system will have access to the
debugging mode via the user level setting mode of memory switch.
（
Attention
）
Not pressing
at same time will cause the failure of access to
debugging mode.
2
）
Press
to have access to debugging mode, the monitor will show “CP---” as displayed in
1
）
Power on the machine
2
）
Set the pattern number as C1.1 with
&
.
3
）
Press
to turn on the Sewing LED. After
that the presser will go up.
4
）
If the pattern shape is sound, the sewing operation
will proceed.
5
）
Sew the C1 pattern in the sequence in the
combination. When the last pattern in the
combination is finished, the machine will start
sewing the first pattern and repeat this
combination.
