11
2
）
Use
&
to display the storage
mode of pattern
3
）
Press
to have access to the pattern
storage mode.
4
）
Press
to select the stored P-No.
This selection can also be done by using
&
.
5
）
Use
to select
.
Use
&
to set pattern number.
6
）
Press
and use
&
to
set the X scale rate
at “50”% and the Y
scale rate
at “80%”, as well as Max
Speed limitation
at “2000”rpm.
7
）
Press
to activate X scale rate
,which is displayed at 0.0. The
stroke in X direction can be changed in
step at 0.1mm. Use
&
to
set this value at 0.5.
8
）
Press
to activate Y scale rate
,
which is displayed at 0.0. The stroke in Y
direction can be changed in step at 0.1mm.
Use
&
to set that value at
1.0.
9
）
Press
to end the setting.
