6
2.2.3 Sewing
Attention 1
：
When depressing the pedal to level 1 and lowering the presser, the user can
press
&
to change the sewing position of pattern. Then the user could start sewing
at the selected position by depressing the pedal to level 2. During the sewing, for the problems like
thread-breakage, user can use this method for mending after releasing the malfunction
Attention 2
：
Don’t apply the operations in Attention 1 into the operation of pattern trial sewing,
in case the user depresses the pedal to level 2 by mistake, thus start the machine and cause the
dangerous. For the operations in trial sewing, user shall strictly follow the descriptions of
【
Confirmation of Pattern Shape
】
in the above sector.
2.2.4 Change to Other Patterns
1
．
Put the fabric to the presser section
2
．
Step on the pedal switch to the level 1, then the
presser goes down. If you detach the foot from the
pedal, the presser will go up.
3
．
Lower the presser to the next level, and then
depress the pedal to the second level to start sewing
4
．
At sewing end, the presser will go up and stop at
the initial position.
1
．
Press
to turn off the Sewing LED.
2
．
Press
to select the
.
3
．
Use
&
to set pattern
number.
4
．
Set the X/Y scale rate, speed and so on in
the same way
5
．
Press
to turn on the Sewing LED,
thus have access to Sewing status.
