Section 7. Troubleshooting
7.1 Using the Information LED for Troubleshooting (VX40 Cleaner)
The Information LED on the control box flashes in a specific sequence to indicate one of three
possible cleaner malfunctions.
Information LED Flashing
Solution
LED flashes once with one second
interval.
Unplug the floating cable from the control box and reconnect.
If the problem is not resolved through troubleshooting, contact Zodiac After
Sales Support at 1300 763 021.
LED flashes twice with one second
interval
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact Zodiac After Sales Support at
1300 763 021.
LED flashes three times with one
second interval
Check propeller for debris.
Clean the filter.
Start a new cleaning cycle.
If the problem persists, contact Zodiac After Sales Support at
1300 763 021.
7.2 Viewing Cleaner Status Information for Troubleshooting (VX45 4WD, VX50 4WD,
and VX55 4WD)
Information about your cleaner's current status and any relevent error condition is available through a
troubleshooting status screen.
After cycling through each message, control box returns to current day and time
display.
To view cleaner status information:
1. Remove cleaner from the pool and turn power off.
2. Press
and
at the same time and hold for at least five (5) seconds.
The following cleaner operation messages are
displayed consecutively for three (3) seconds:
Total hours cleaner has run since new.
Zodiac recommends no more than 3 x cleaning cycles per week
in summer to maintain a clean pool and keep the filter less clogged.
Last error code (if cleaner has had at least one error).
Time (in operating hours) the error occurred.
21
H0516700_REV C