3
Figure 28. Remove Filter Canister Assembly
7.
Push the quick release button on the canister
assembly (4) and pull open the fi lter assembly
(5), as shown in Figure 29.
4
5
Figure 29. Open Filter Canister Assembly
8.
Separate the fi lter canister from the fi lter
support (6), as shown in Figure 30.
6
Figure 30. Remove Filter Canister
9.
Empty all debris from the fi lter canister, then
rinse the canister, the fi lter support, and the
cleaner under water or using a hose, as shown
in Figure 31.
Figure 31. Wash Filter Canister
7
6.2. Cord Tangling
Tangling can occur more frequently when operating
the cleaner on the automatic timer 7-Day Programmed
Cycle (VX45 4WD/ VX50 4WD and VX55 4WD).
Spread out the fl oating cable over the pool, ensuring
there are no kinks or coils in the cable. Do not leave the
cleaner unattended for prolonged periods and follow
procedure below to avoid excessive tangling.
NOTE:
For optimal patterning and reduced tangling, the
floating cable should enter the water near the middle
of the pool length. Only place enough cable in the
water to reach the farthest point in the pool.
17
H0516700_REV C
