Zodiac Transport 160, Руководство пользователя

Страница: 69 / 74

69
EN
GLIS
H
¢
TROUBLE SHOOTING
Problem Probable Cause Corrective Action
The transceiver will not
power up after connecting
a 13.8 V DC power
supply and pressing the
power switch. Nothing
appears on the display.
1.The power
cable has been
connected
backwards.
2.One or more of
the power cable
fuses are open.
1.Connect the supplied DC power
cable correctly:Red ( + ); Black ( - ).
2.Look for the cause of the blown
fuse(s).
After inspecting and correcting any
problems, install a new fuse(s) with the
same ratings.
The display is too
dim,even though you
selected a high brightness
level.
The supply voltage
is too low.
The supply voltage requirement is
13.8 V DC ±15% (11.7 V to 15.8 V
DC). If the input voltage is outside this
range, adjust your regulated power
supply and/or check all power cable
connections.
You cannot transmit even
though you press
microphone [PTT].
The microphone
plug has not been
inserted completely
into the front panel
connector.
Switch OFF the power, then insert the
microphone plug until the locking tab
clicks in place.
Scan not available
Channel not
included in
scan when PC
programming
Communicational range
drop down
Change output power to a high level.